Vehicles
Sections
131 not categorized PORSCHE 356 B SIDE VENTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1987-89 (includes uncategorized and accessory items) 12737018L Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech sport drilled & slotted rotors.every sportstop brake rotor is produced from a high quality centric parts blank casting and finished in a durable e-coating for corrosion resistance. Sportstop drilled and slotted brake rotors (prefix 127) prevent glazing of the pads, add bite and improve wet and dry braking performance.every sportstop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rus...(choose a part on the right to read more) General Fitment911 1984-86911 1987-89 911 1989-94
$102.34
Make a selection FVD95861880MG Genuine: engine - v8 capacity - 4806 ccm compression ratio - 12,5:1 max. Power - 309kw (420hp) @ 6500rpm max. Torque - 500nm @ 3500rpm max. Speed - 256km/h max. Rpm - 7000rpm acceleration 0-100km/h - 6,0s tuning: max. Power - 325kw (442hp) @ 6000rpm max. Torque - 530nm @ 4500rpm max. Speed - 265km/h max. Rpm - 7200rpm acceleration 0-100km/h - 5,7s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importan...(choose a part on the right to read more)
$1,484.16
Make a selection HEI600062 With dmsb license for all 40 mm roll bars for installation in existing bars and cages from heigo (as well as all other manufacturers) 1. To be used with all active rollover protection with a dmsb- or ons certificate from heigo 2. To be used with all active rollover protection with a dmsb- or ons certificate from matter gmbh (graben-neudorf) 3. To be used in so called self constructed devices as decribed in chapter 2 53-8.1.a in the current attachement j or chapter 2 53-8.4 in the old attachment j under the isg. 4 . This harness bar is only allowed to be used at dmsb-events and only at non fia events. Every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have...(choose a part on the right to read more) General FitmentALL
From $389.06
Make a selection 99335140887 This was the rotor used on the 964 cup / rsr / 964 cup / rsr / 993 cup / rsr / GT2 evo. This disc is a genuine motorsports replacement part. It is drilled and vented. Sold individually. The corresponding right side is part # 99335140887 all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$721.60
Make a selection FS911 Das schild is a custom thermoformed, lightweight abs plastic liner designed specifically for the underside of your Porsche lid. Das schild offers Porsche owners the first and only product (patent pending) available to assist in preventing the damage that is likely to occur from overpacking the trunks without this protective liner. Das schild is the only product on the market to preserve and protect the vulnerable lids of your Porsche. Paintless dent removal (pdr) technicians have often been unsuccessful in returning the lid to its original condition. Given these unsuccessful attempts, the only alternative is to resort to costly, conventional body repair. After many years of working with these pdr technicians, t...(choose a part on the right to read more) General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1994-98 911 1989-94
$229.50
Make a selection E13209 Introducing the latest in tow hook innovation: engineered with an increased side load capacity and adjustable-length rigid mount receiver. This tapered stainless loop design incorporates a new locking function to maintain your preferred loop position. Additional features include machined graphics, rotational timing and camera mount compatibility.
$145.00
Make a selection 98655297418KT Enhance the race-inspired design of your Boxster or Boxster s with our aluminum-look paint trim. Complete interior kits includes instrument surround, center air vents, side vents, door trim covers, steering wheel, handbrake lever; kits are very complete. Simple installation. Must specify color code or interior leather for exact match and seamless matching interior. Add $255.00 for any color except black. Tiptronic add an additional $90.00. Separate pieces can be special ordered, call for individual pieces.
$4,054.17
Make a selection 96435104102EQ If you are experiencing a pulsation and hearing grinding sounds when braking, odds are your rotors need to be replaced to restore full stopping power. This rotor is an OEM replacement, manufactured by zimmermann in Germany. It is internally vented and z-coated for corrosion resistance. Sold individually - left or right side fitment
$170.50
Make a selection 24135299601YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$286.00
Make a selection 91154240303 This seal sits inside the door frame along the a-pillar and roof. It prevents moisture and wind noise from entering the cabin. As these classics age the original gasket becomes brittle and will crack, so it is essential that this seal is in good order. Sold individually. Driver's side fitment. 1 necessary per car. View/Change Diagram
From $44.69
Make a selection 90153193320 This is a thick rubber seal that seals the left or right side vent window. As these classics age, the original gasket can become brittle, so it is essential that it is in good order as it keeps moisture out of the cabin. Sold individually. Left or right side fitment. View/Change Diagram
From $1.76
Make a selection 91135104122ZXD Porsche always installed drilled ventilated rotors on their premium models. Cross drilled rotors help release gasses created by the friction of the pad on the rotor. A cooler rotor performs better and is less prone to warping. You should consider this upgrade when more stopping power is required. Fits left or right sides. General Fitment911 1984-86911 1987-89
$153.14
Make a selection 90135563202EQ Classic Porsche flexible brake hoses can suffer from dry rot and can eventually split and leak fluid, creating a serious safety concern. Brax quality replacement hose manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. Drivers or passengers side fitment. 2 necessary per car.
$28.60
Make a selection 91135204108EQ If you are experiencing a pulsation and hearing grinding sounds when braking, odds are your rotors need to be replaced to restore full stopping power. This rotor is an OEM replacement (replacement for original #911 352 041 08), manufactured by zimmermann in Germany. It is internally vented and z-coated for corrosion resistance. Features: anti corrosion "z-coating" prevents rust. Simple bolt on, modifications are not necessary. Made in Germany. Sold individually. 2 necessary per car. Left or right-side fitment. Please note: rotors should always be changed in pairs. Please check the model fitment tab to ensure accurate fitment.
$166.10
Make a selection 24135291101YS High efficiency performance and race brakes for track and street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad but very resistant to heat and loads of heavy braking means that yellowstuff has been used with great success in race cars and on street cars. Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for street and tack driving. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider ebc redstuff. Highlights: made for up to 9...(choose a part on the right to read more)
$204.60
Make a selection 24135199601YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$363.00
Make a selection 24135199601RS Highlights: made for up to 900*c (1,650*f), for race cars but street legal! High friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a ...(choose a part on the right to read more)
$300.30
Make a selection 24135296401YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$276.10
Make a selection 24135199702YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$334.40
Make a selection 12737019L Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech sport drilled & slotted rotors.every sportstop brake rotor is produced from a high quality centric parts blank casting and finished in a durable e-coating for corrosion resistance. Sportstop drilled and slotted brake rotors (prefix 127) prevent glazing of the pads, add bite and improve wet and dry braking performance.every sportstop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rus...(choose a part on the right to read more) General Fitment911 1984-86911 1987-89 911 1989-94
$249.98
Make a selection 12637018SR Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech slotted sport rotors. Stoptech slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance. General Fitment911 1984-86911 1987-89 911 1989-94
$112.86
Make a selection 12837018R Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech sportstop cross-drilled or drilled+slotted rotors.every sportstop brake rotor is produced from a high quality centric parts blank casting and finished in a durable e-coating for corrosion resistance. Sportstop drilled and slotted brake rotors (prefix 127) prevent glazing of the pads, add bite and improve wet and dry braking performance.every sportstop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water e...(choose a part on the right to read more) General Fitment911 1984-86911 1987-89 911 1989-94
$106.58
Make a selection 1150009 These are made with club sport events in mind. They work with stiffer springs and lowering springs (we recommend h&r or eibach) and have a fully threaded body for individual lowering like the original 993 cup suspension. You will need to run our drop links for the sway bar, part # FVD333900. Lowering is adjustable to 30 mm (1.18 inches) left or right side fitment. Sold individually. For matching front club sport shocks, please order part # 1150002li for the left and part # 1150002re for the right. For a properly spec'd complete kit including front and rear club sport shocks with lowering springs and rear drop links, please order part # FVD33399300.
$382.80
Make a selection 153001351 Recaro ergomed e (with/without airbag) General FitmentALL
$1,690.70
Make a selection 267412351 Equipment - top comfort General FitmentALL
$1,482.94
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |